Meet the team icon brushless motors

Fantom T V3T Team Works Plus Pro Spec brushless motor FANWP | eBay

meet the team icon brushless motors

To achieve this there is continuous investment in innovation and team work. Helping people reach their goals by living the values of the company is a passion WEG is the largest industrial electric motor manufacturer in the Americas and one. Designed in the USA, Fantom is proud to announce the all new ICON Series All Team Edition motors are guaranteed to meet Fantom's strict specifications! All Team motors are evaluated using the highly accurate Motolyser brushless. NEW Turn ICON TEAM WORKS MOTOR (image is representative of the All Team Works rotors and stators are guaranteed to meet our strict specifications ! are evaluated using the highly accurate Motolyser brushless motor tester.

That's correct, another first from Fantom! With our unique design, we've totally eliminated the need for stator screws. Why settle for an all purpose motor when you can have a motor designed to fit your exact application! We've got you covered!! Professionally built to our strict standards, which includes the rotor properly shimmed, complete evaluation of the coils, rotor strength and asymmetry and sensor board deviation.

The timing is also set to our recommended setting for your application or you can choose a custom setting. This is our premium motor, built with all available options. This is as good as it gets!

meet the team icon brushless motors

All Team Works motors are guaranteed to meet our strict specifications! If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly. We also make sure that it has the correct end play, so that it is not bound up or too loose. These are premium custom bearings made with special SUJ2 material. These are not ceramic and not stainless steel. This material is harder than stainless steel and tougher than ceramic.

These bearings are lighter and capable of achieving higher RPM's compared to standard chrome steel bearings. The high-tolerance SUJ2 balls are super-hard and roll with extremely high accuracy and low resistance. We also make sure the bearings seats are sized correctly before installing the bearings.

meet the team icon brushless motors

This ensures that the bearings are not squeezed or distorted when installed, which could cause extra drag or nonconcentrical bearing movement. If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearings correctly. Pro Titanium Timing Adjustment Screws Option - Eliminates the power robbing magnetic drag on the rotor that the stock steel screws cause and improves RPM, efficiency and horsepower!

Brushless Motors

Tuning Pin Setup Option - Patent pending tuning pins eliminate the need for screws to hold the motor together, and open up a new world of tuning capabilities. Tuning pins replace the traditional screws and allow you to custom tune your motor with different length and different material tuning pins.

By changing the lengths and materials, you are able to precisely tune the RPM and Torque characteristics of your motor.

We set up your tuning pins based on the race application that you choose. Dyno Test - We evaluate your motor to make sure it is performing properly.

meet the team icon brushless motors

We test your motor on our Fantom dyno, through an ESC. Our patented design stator provides maximum torque while producing the most insane RPM ever seen before! Plus we've also added the ability to fine tune your motor via "Patent Pending Tuning Pins".

That's correct, another first from Fantom!

meet the team icon brushless motors

With our unique design, we've totally eliminated the need for stator screws. Why settle for an all purpose motor when you can have a motor designed to fit your exact application!

17.5 Turn ICON Team Motor

We've got you covered!! Professionally built to our strict standards, which includes: The timing is also set to our recommended setting for your application or you can choose a custom setting. All Team Edition motors are guaranteed to meet our strict specifications! Re-Shim standard brass shims - We adjust the rotor shims so that the rotor "floats" centered properly within the magnetic field.

meet the team icon brushless motors

If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly. We also make sure that it has the correct end play, so that it is not bound up or too loose. The ESC is set at the default settings no added programming.

Turn ICON Team Motor

Rotor Strength Test - Your rotor is tested to make sure it meets proper specs. If we find that the rotor does not meet our strict standards, we will replace it. With this test, the rotor's magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester. Coil Resistance Test - Your stator is tested to make sure it meets proper specs. With this test, we evaluate the ohms resistance of your stator to make sure it meets proper specs and to detect shorts. Each coil is tested individually.